SⅡ series standard

Electric Screwdriver
Standard Electric Screwdriver ESD Electric Screwdriver Z-type Electric Screwdriver Pneumatic Electric Screwdriver Elbow Type Electric Screwdriver Intelligent Digital Display Electric Screwdriver Smart Screwdriver for Manual Operation Electric Screwdriver for Automatic Machine Servo Screwdriver for Automatic Machine Power Adapter
Screw Feeder
Feeder For Automatic Machine Feeder For Manual Operation Nut Feeder Screw Counting Machine Screw Extra Feeder
Automatic Screw Tightening Machine
Three-axis Locking Device Four-axis Locking Device Six-axis Locking Device On-line Locking Device Multi-axis Locking Device Integrated Locking Device
Peripherals
Tester Bracket Magnetic Ring Balancer

+86 755-27678899

Language

English 中文

This mechanism is suitable for ordinary straight electric screwdriver due to the interference above the screw, resulting in normal use, and through this mechanism to avoid interference to achieve normal lock payment of specific products.

Product Details

1. This mechanism is suitable for the ordinary straight electric screwdriver that cannot be used normally due to interference directly above the screw, and the mechanism avoids interference to achieve normal lock.

2. The center distance of the screwdriver head part is 6.5mm, and the maximum locking torque is 5.0kgf.cm. It is suitable for the locking environment where the screw center distance from the edge is less than 5mm and the torque is less than 5.0kgf.cm.

3. When the size of the mechanism does not meet the actual requirements, it can be customized according to demand.

Product Parameters

Input voltage		DC 30V
Rated power		25W
Starting mode		Push type
Specification and model		KD200MLZ	KD300MLZ	KD500MLZ
Torsion range	kgf.cm	0.2-2.0	0.3-3.0	0.5-5.0
	N.m	0.0196-0.196	0.029-0.29	0.049-0.49
	Lbf.in	0.1734-1.734	0.260-2.61	0.434-4.33
Torque accuracy (%)		±5	±5	±5
Torque adjustment		stepless	stepless	stepless
No-load speed (rpm)		100-1000	100-1000	100-1000
Applicable screw(mm)	Mechanical tooth(mm)	1.0-2.3	1.0-2.3	1.4-2.6
	Self-tapping teeth(mm)	1.0-2.0	1.0-2.0	1.4-2.3
Suitable for screwdriver head		ø4	ø4	ø4
Torsion curve diagram

Power Adapter

S,B product power supply

This product is a wide range of input voltage, output voltage adjustable, with overvoltage, overload, short circuit protection of industrial switching power supply.