SⅡ series

Language

English 中文

The screw is absorbed by the negative pressure generated by the vacuum generator, which eliminates the need to manually pick up the screw.

Product Details

1. Draw screws through the negative pressure generated by the vacuum generator, which can eliminate the need to manually pick up screws.

2. Especially suitable for non-magnetic screws (stainless steel and non-ferrous cobalt nickel and other non-metallic screws).

3. Dust and debris generated during screw tightening can be removed by negative pressure.

Input voltage		DC 30V
Rated power		25W
Starting mode		Push type
Specification and model		KD100MLV	KD200MLV	KD300MLV	KD500MLV	KD800MLV
Torsion range	kgf.cm	0.1-1.0	0.2-2.0	0.3-3.0	0.5-5.0	1.0-8.0
	N.m	0.0098-0.098	0.0196-0.196	0.029-0.29	0.049-0.49	0.098-0.78
	Lbf.in	0.087-0.867	0.1734-1.734	0.260-2.61	0.434-4.33	0.867-6.94
Torque accuracy (%)		±5	±5	±5	±5	±5
Torque adjustment		stepless	stepless	stepless	stepless	stepless
No-load speed (rpm)		100-1000	100-1000	100-1000	100-1000	100-1000
Applicable screw (mm)	Mechanical tooth(mm)	1.0-1.5	1.0-2.3	1.0-2.3	1.4-2.6	1.6-3.0
Applicable screw (mm)	Self-tapping teeth(mm)	1.0-1.5	1.0-2.0	1.0-2.0	1.4-2.3	1.6-2.6
Suitable for screwdriver head		ø4	ø4	ø4	ø4	ø4
Torsion curve diagram